background image

3

4
4

10

11

12
16
19
20

TABLE OF CONTENTS

WARNING

1.  For safe operation,read and understand the instruction manual.

2.  To reduce the risk of electric shock, do not expose your cordless tool to water or rain.

3.  Replace damaged parts immediately.

4. 

5. 

Disconnect and remove the battery pack before servicing.

 

7. 

Do not use when children or others are around. Keep safety devices(guards, shields, 

switches etc.) in place and working.

8.

 

9.

 

Remove objects that could be thrown by or become entangled in the snowblower.

 

 

 

Use only 60V Li-ion battery YF60VRX4.0-BAT & YF60VRX2.5-BAT and battery charger. 

Never direct the snow discharge chute at the operator,at bystanders,at vehicles,or at windows.

6.

Some dust created by power sanding, sawing, grinding, drilling and other construction 

activities contains chemicals known to the state of California to cause cancer, birth defects 

or other reproductive harm. Some examples of these chemicals are:

• Lead from lead - based paints

• Crystalline silica from bricks and cement and other masonry products, and

• Arsenic and chromium from chemically -treated lumber. 

Your risk from these exposures varies,depending on how often you do this type of work. 

To reduce your exposure to these chemical: work in a well ventilated area,and work with 

approved safety equipment,such as those dust masks that are specially designed to filter 

out microscopic particles. For more information go to www.P65warnings.ca.gov.

Summary of Contents for YF60VRX22-ST






















Reviews: