![background image](http://html1.mh-extra.com/html/yard-force/y4gt-a40-d001/y4gt-a40-d001_operators-manual_905873013.webp)
11
OPERATION
FUEL
USE FRESH UNLEADED FUEL (PETROL), 90 OCTANE OR BETTER – Do NOT use
E10 or Ethanol blends. Mix with a premium grade air cooled 2-Stroke oil at a ratio
of 40:1
Mix fuel with 2-stroke oil in an approved container. Shake gently and ensure a
thorough mix.
WARNING!
Never use raw fuel with out oil in your unit. This will cause
permanent engine damage and void the your warranty for that product.
Never use a fuel mixture that has been stored for over 90 days.
CAUTION:
The 2 stroke oil must be premium grade oil for 2-cycle air cooled
engines and must be mixed at a 40:1 ratio with the fuel. Bynorm 2 Stroke
engine oil is recommended. Mixing the fuel at a greater ratio than 40:1
provides insufficient lubrication and will cause engine damage and voids
your warranty.
FUELING
WARNING!
Always shut off engine before fuelling. Never add fuel to a
machine with a running or hot engine.
Do not
SMOKE!
Failure to heed this warning could result in serious personal
injury.
WARNING!
Always ensure there is adequate ventilation when handling fuel.
WARNING!
Fuel is very flammable. Use extreme care when mixing, storing
or handling fuel or serious personal injury may result.
1. Place the line trimmer upright on the ground or on a sturdy bench and wipe
any debris from around the fuel cap.
2. Unscrew the fuel tank cap and pour the mixture into the tank using a funnel
(not supplied).
3. Be careful not to spill any mixture. If this happens, wipe the spill with a clean
rag.
4. Start the engine at least three metres away from the area where the fuel tank
has been filled up in order to reduce risk of fire.
MOTOR
Unleaded Plus 2 stroke oil.
Mixed 40:1