manualshive.com logo in svg

Yard force Y4GT A40 D001, Operator'S Manual, Page: 21 / 23

Share
Download
Yard force Y4GT A40 D001 Operator'S Manual Download Page 21

19

STORAGE (30 DAYS OR LONGER)

1.  CLEANING - Thoroughly clean the line trimmer exterior.
2.  INSPECTION - Inspect the entire line trimmer and blade for damage, including 

loose or missing components and repair as necessary.

3.  FUEL - Drain the fuel tank and then clear the carburettor and lines by running 

the line trimmer until it stops from lack of fuel.

4.  LUBRICATION - Remove the spark plug and then pour approximately a tea 

spoon of 2 stroke oil into the cylinder through the spark plug hole. Before 
reinstalling the spark plug, pull the recoil starter 2 or 3 times to distribute the 
oil over the cylinder walls.

5.  LUBRICATE the blade with oil to prevent rusting.
6.  AIR CLEANER - Remove, clean and reinstall the filter element.
7.  STORAGE - Store the line trimmer in a clean, dry, dust-free environment.

DISPOSAL

At the end of the life of the product please recycle/dispose of the product 
and any waste liquids in accordance to the regulations and requirements 
of your local council.

MAINTENANCE AND STORAGE

Summary of Contents for Y4GT A40 D001
























Reviews:

No comments