120v
LITHIUM-ION
TM
6
7
DESCRIPTION OF PRODUCT PARTS
Parts list (See Fig. 1)
1
.
Power head
2
.
Harness hook
3
.
Auxiliary handle
4
.
Shaft connector
5. Safety guard
6. Cutting head
7. Speed adjustment button
8. Power ON/OFF button
Parts included (See Fig. 2)
A. Power head assy x 1
B. Line trimmer attachment shaft x 1
C. Auxiliary handle x 1
D. Manual x 1
E. Shoulder harness x 1
Carefully remove the machine and parts from its
packaging. Identify all the parts
packaged in the carton against the parts list.
Please contact our customer service center
(Monday - Friday 8:30AM - 5:00PM ET) at (866)
902-9690
if anything is missing.
WARNING!
If any parts are damaged or
missing, do not operate this tool until the missing
parts are replaced. Failure to heed this warning
could result in serious personal injury.
NOTE!
Always recycle the packaging in
accordance with local recycling laws.
WARNING!
This item might require two
people to remove from the package. Please be
sure to have another person available to help you
if needed.
TECHNICAL SPECIFICATIONS
Item No.
Y0LTX18TB00
Voltage/Capacity 120 V DC / 2.5 Ah Li-ion
Cutting Width
18
"
Cutting Line Dia.
0.095
"
(0.080" Compatible)
Line Feed
Dual Line, Tap-Feed
Running Speed
3 Speeds, 4000/5000/
6000 RPM
Motor
Brushless
Charger
Input: 100~120 V, 50/60 Hz,
Output: 120 V DC, 4 A
Charging Time
40 minutes
Weight
19.6 Lbs
Battery Pack Type Y0L120BAT2.5 (not included)
Adapter Type
Y0L120CGR (not included)
INTENDED USE
The product is intended for cutting grass, weeds
or similar soft vegetation in areas that are hard to
reach, e.g. under bushes, on slopes and edges. It
may not be used to work on unusual thick, dry or
wet grass, e.g. pasture grass, or to shred leaves.
For safety reasons it is essential to read the
entire instruction manual before first operation
and to observe all the instructions therein.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your
attention to possible dangers. The safety symbols
and the explanations with Vthem deserve your
careful attention and understanding. The symbol
warnings do not, by themselves, eliminate any
danger. The instructions and warnings they give
are no substitutes for proper accident prevention
measures.
WARNING
: Be sure to read and understand
all safety instructions in this Operator’s Manual,
including all safety alert symbols such as
“
DANGER
,” “
WARNING
,” and “
CAUTION
” before
using this tool. Failure to follow all instructions
listed below may result in electric shock, fire, and/
or serious personal injury.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols
that may appear on this product. Read,
understand, and follow all instructions on the
machine before attempting to assemble and
operate.
This symbol, before a safety comment,
indicates a precaution, a warning or
a danger. Ignoring this warning can
lead to an accident for yourself or
for others. To limit the risk of injury,
fire, or electrocution always apply the
recommendations indicated.
Wear ear protection
Wear eye protection
Wear protective gloves
Protect against rain and wet.
Do not expose and operate the tool in
rain.
Beware of thrown or flying
objects to bystanders.
Keep by standers a safe
distance away from the
machine.
Objects thrown by the product could
hit the user or other by standers.
Always ensure that other people
and pets remain at a safe distance
from the product when it is in
operation.
In general, children must not come
near the are a where the product is.
06
3
o
Do not expose and operate the tool
in rain.
Wait until all machine components
have completely stopped before
touching them. The blades continue
to rotate after the machine is
switched off, a rotating blade can
cause injury.
Warning symbols on the battery pack
Batteries contain Li-ion. Waste
batteries should be recycled
according to local laws. Do not
dispose of waste batteries as
unsorted municipal waste.
Do not throw into water
Do not litter to fire.
Do not subject the battery to strong
sunlight over long periods and do
not leave it on a heater
(max 113° F).
Warning symbols on the charger
+
-
The charger is for indoor use only.
Double insulation
Pole orientation
Protective 6.3A limited
Do not expose and operate the tool in
rain.
T6.3A
max. 113
˚
F
