120v
LITHIUM-ION
TM
8
6.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
7.
Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed.
Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Charger
1. R
echarge only with the charger specified
by the manufacturer.
Do not use the
original charger on other li-ion batteries or on
any other type of battery as this can increase
the risk of fire or explosion.
2.
Check the battery charger, cable and plug
before each use.
Do not use the battery
charger if damaged.
Do not open the
battery charger yourself;
charger must be
repaired by qualified personnel using original
spare parts.
3. The charger is designed to use a standard
household 100-120 V~, 50/60 Hz power
source, ensure that the plug matches the
outlet.
4.
Never modify the plug in any way; this
will reduce the risk of electric shock.
5.
Do not abuse the cord of charger.
Never use the cord for carrying, pulling or
unplugging the charger. Keep cord away
from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
6.
Make sure the charger cord is situated so
that it will not be stepped on,
tripped over
or get damaged.
7.
Keep the battery charger clean.
Contamination can increase the risk of
electric shock.
8.
Protect the battery charger from rain and
moisture.
If water accesses the battery
charger there is an increased risk of electric
shock.
9.
Battery will heat up whilst charging.
To
reduce the risk of fire, do not operate battery
charger on flammable surfaces such as
paper or textiles.
10.
The temperature range over which the
battery pack can be charged is typically
between 41° F to 113° F.
Attempts to
charge out with the prescribed temperature
range may automatically be blocked by
the protection circuitry of the battery pack.
Longest life and best performance can be
obtained if the battery pack is charged at
room temperature.
11.
Disconnect charger from the power
supply when not in use.
This will reduce
the risk of electric shock or damage to the
charger.
Battery pack
1.
Fully charge battery pack before first use.
2. Recharge battery pack immediately when
the power output starts to slow.
DO NOT
CONTINUE TO USEPRODUCT WHEN
BATTERY LEVEL IS LOW.
3.
To prevent serious damage to the battery,
charge in temperatures above 41° F
or below 113° F.
Longest life and best
performance can be achieved when battery
is charged at room temperature.
4
If the battery temperature is above113° F
it must be allowed to cool before putting
it into the charging station.
5. To reduce the risk of explosion, ensure
the battery pack is not left in the sun for
extended periods of time and that it is kept
away from fire.
6.
Do not c
arry individual battery packs in your
pockets or bag as they could short-circuit
against other metal items.
7. Should a li-ion battery catch fire, ensure to
use the correct fire extinguisher to combat
the fire.
DO NOTTHROW WATER ON A
BURNING LI-ION BATTERY.
8. If the battery pack becomes too hot during
charging, disconnect and switch off
immediately. Contact the service centre
directly.
9.
Do not attempt to open the battery
yourself.
10.
When battery pack is not in use keep it
away from other metal objects
such as
paperclips, coins, keys, nails, screws or
other small metal objects that can make a
connection from one terminal to another.
Maintenance and storage
1.
Keep all nuts, bolts and screws tight to
be sure the product is in a safe working
