![background image](http://html1.mh-extra.com/html/yard-force/sa500eco/sa500eco_original-instructions-manual_905800028.webp)
54
55
TROUBLESHOOTING
Nr. Message
Symptom
Action
6
LED flash
The Robomower does
not receive the boundary
wire signal.
(Robomower placed
inside boundary area.)
1. Verify that the charging station indicator light
is blue. If not, refer to installation instructions
and charging station troubleshooting.
2. Verify that both charging station and
Robomower are set to the same signal, S1
or S2.
3. Check if the boundary wire is connected in
the correct direction.
4. Switched, the sensor will state "outside"
when inside the boundary, and vice-versa.
To verify, disconnect the boundary wire from
the charging station, and reconnect it the
opposite way.
7
LED flash
Battery voltage is
too low to perform
normal mowing.
1. Normally if voltage is low, the mower should
automatically return to the charging station.
2. If not, please carry your mower manually to
charging station when it has stopped on the
lawn.
8
LED flash
Charging
Wait for battery to recharge.
9
Reset factory defaults
1. Switch OFF the device.
2. Place Robomower on flat, even surface.
3. While pressing and holding the START
button, switch ON the device.
4. The Robomower will boot up. All LEDs flash.
5. Release START button. Factory reset is
complete.
Note: The Robomower must stand on a flat
surface, because the inclination sensors are
also zeroed.
DECLARATION OF CONFORMITY
To the provisions of Council Directives
We
SUMEC UK Co.,Ltd.
Unit A&B, Escrick Business Park
Escrick, York YO 19 6FD
Declare that the product:
Machine Description: Robomower
Machine Type: SA500ECO
Charger Model: FY3201500
Function: Cutting grass
Complies with the essential health and safety requirements of the following directives:
EC Machinery Directive: 2006/42/EC
EC Directive of Electromagnetic Compatibility 2014/30/EU
EC Noise Directive 2000/14/EC & 2005/88/EC
WEEE Directive (2012/19/EU)
RoHS Directive (2011/65/EU)
Standards and technical specification referred to:
EN 60335-1:2012+A11;
EN 50636-2-107:2015;
EN 62233:2008;
EN 55014-1:2006+A1+A2;
EN 55014-2:2015
EN 61558-1:2005+A1
EN 61588-2-16:2009+A1
EN 60529 1991+A1: 2000
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 50581:2012
Authorized Signatory
Date: 11.10.2017
Signature:________________________
Place: York
Name: Mariana Hall
General Manager
SUMEC UK
Unit A&B Escrick Business Park
Escrick, York
YO19 6FD