![background image](http://html1.mh-extra.com/html/yard-force/sa500eco/sa500eco_original-instructions-manual_905800024.webp)
46
47
Press S1 or S2 on the control panel to match the Robomower's signal to
the charging station's. The button of the currently active signal is illuminated.
Home & start button
Press the START button and close the top cover and the Robomower will begin cutting.
When the programmed work time is passed, the device will return to the charging station.
Important note:
The Robomower will start working again on the following day and at the same time of day
when the start button was pressed initially.
Example: You start the Robomower on Monday at 15:30 with a working time of 4 h. The
device will work on Monday until 19:30 and then return to base. On Tuesday 15:30, the
Robomower will automatically start again working for the same 4 h. This will continue every
day until interrupted by the user.
HOME
Pressing the HOME button and closing the lid will send the Robomower back to base for a
complete recharge. Note this will not stop the current programming. If the working time has
not run out when charging is complete, the device will start cutting
again. It will also start working again on the following day.
STOP
To interrupt the automatic working schedule, press the STOP button to open the top cover,
and close it again without pressing any control button. The Robomower will beep four times
to confirm the interruption. It will not resume working without further user commands.
Edge cutting
As the first cutting action of each day, the Robomower will trim the lawn edge. Therefore,
while cutting, it follows the boundary wire in clockwise direction.
This function only engages when the Robomower launches from the charging
station.
Charging Information
The Robomower will go back to charging station by itself in the following situations:
1. When you press the
button and close the keypad top cover.
2. When the working time is reached.
3. When less than 30 % battery charge is remaining.
Note: If the Robomower fails to dock to the charging station, it will return to the cutting area
and try again.
Note: If the ambient temperature around charging station is higher than 40 °C, the device will
stop charging to protect the battery. Once the temperature drops sufficiently, charging will
resume automatically.
OPERATION
OPERATION