42
43
OPERATION
Control Panel
Once the Robomower is fully charged, it is ready for programming.
While the default factory settings will suit the majority of users, it is worth familiarising yourself
with the options available.
To start programming, press down on the large STOP button (2) to open the top cover and
access the controls.
zone 1
zone 3
zone 4
zone 5
zone 2
The control panel has five functional areas.
Zone 1: Status indicator LEDs
Zone 2: Working time setting
Zone 3: Signal setting
Zone 4: Locking button
Zone 5: Home & start button
Lock and Unlock
Unlock
A blinking LED above the lock button [
] indicates that the control panel is locked.
To unlock the control panel, enter the PIN code.
There is no factory-default PIN. Instead, press the lock button [
] four times.
If the LED goes out, the PIN entry was successful and the control panel was unlocked.
OPERATION
Lock
Using the main power switch (11) will automatically lock the control panel.
You can also manually engage the lock. To do this, simply press the lock button [
] on the
unlocked control panel, and close the top cover. The Robomower is now locked and cannot
be used again without unlocking.
In case of rebooting or unlocking the mower, please note that the Robomower will remain in
the preset work time.
Change PIN code
The analog keyboard
The panel is equipped with a 5 keys numerical keyboard.
Use "4H" for 0, "6H" for 1, "8H" for 2, "10H" for 3, "S1" for 4, and "S2" for 5.
Changing the PIN Code
1) Switch OFF the main power switch (11)
2) Press and hold the lock button [
].
3) Hold down the lock button [
] while switching ON the main power switch (11). After
about 6 seconds, all LEDs on the control panel will start flashing fast.
4) Release the lock button [
].
5) Within 6 seconds, enter your new PIN-Code.
The Robomower will confirm the changed PIN with a single beep.
All LEDs will go out and the Robomower will reboot. Once the LED of the lock button [
]
flashes, the reboot is complete. You can now unlock your Robomower with your new PIN.
Note:
If you do not remember your PIN code, please set a new PIN as described above.
It is not possible to reset the device to the default PIN code of "4x [
]"
