24
25
Do:
- Mow across the face of slopes, never mow up and down. Exercise extreme caution when
changing direction on slopes.
- Watch for holes, ruts, rocks, hidden objects or bumps which could cause you to slip or
trip. Tall grass can hide obstacles.
Do not:
- Do not mow near drop-offs, ditches or embankments; you could lose your footing or
balance.
- Do not mow slopes greater than 15 degrees.
- Do not mow on wet grass. Unstable footing could cause you to slip.
Mower overload protection
To prevent overload conditions, do not try to cut too much grass at one time. Slow down your
cutting pace or raise the cut height. Your mower has built-in overload circuit protection. When
the mower is overloaded, the motor will stop. Switch the mower off and remove the battery
pack, check to see if grass has collected beneath the deck and clear it if necessary, then
restart the mower.
Battery high temperature protection
The battery pack will generate heat during operation. The heat dissipates slower in hot
weather. If the battery temperature exceeds more than 70
o
C during operation, the protection
circuit will immediately turn off the mower to protect the battery pack from damage. Release
the trigger, wait until the battery pack cools down and then restart the mower.
Boost function
This mulching mower is equipped with an intelligent boost function, which would auto- adjust
the motor power during different working situation. High efficiency cutting performance.
Multi-function handle
This multi-function handle could be used in YF 12V iFlex grass trimmer and hedge trimmer.
Removing the handle assy and then connecting to one of the other accessories- by a press of
a button.
OPERATION
MAINTENANCE AND STORAGE
WARNING:
Before performing any maintenance or cleaning work, always ensure
that the battery pack has been removed. Wait until the blade has stopped
completely and the machine has cooled down.
Cleaning
Cleaning the product
– Use a soft brush to remove accumulated dust and debris. Wear safety glasses to protect
your eyes whilst cleaning.
– Wipe down the product enclosure with a slightly damp cloth. Do not spray the unit with
water. Water may destroy the switch unit and the electric motor.
Maintenance
NOTE:
Always wear gardening gloves when handling or working near sharp blade.
1. Keep all nuts, bolts and screws tight to ensure that the machine is in a safe working
condition.
2. Examine the machine and replace worn or damaged parts for safety.
Removing/Installing the blade (Fig. L)
1. Use the correct size wrench to uninstall the blade bolt nut.
2. Wearing heavy gloves hold the blade still and turn the wrench anti-clockwise to remove
the bolt.
3. Fit the replacement blade correctly with marking facing up and align pegs, refit the bolt
and retighten securely to torque 20Nm.
WARNING:
Replace or re-sharpen the mowing blade at the end of the mowing season.
Always have the mowing blade re-sharpened or replaced by a recommended Yard Force
service centre.
Unbalanced blades will cause the lawn mower to vibrate violently which can increase the risk
of accidents occurring. Don´t use mower which blade is unbalanced
Battery maintenance
Use the following procedures to achieve the best battery life:
1. Protect the battery against moisture and water.
2. Store the battery only within temperature range of 5
o
C to 45
o
C. Do not leave the battery
in direct sunlight for extended periods of time.
3. Clean the battery regularly with a soft, clean and dry brush.
4. If you do not use the product for a long time, remember to charge and discharge the
battery pack once every 6 months.
“Click”
