background image

8

9

GENERAL SAFETY WARNINGS

Training

1.  Read the instructions carefully and make sure you fully 

understand them. Make sure you are familiar with the 
controls and the correct use of the product.

2.  Never allow small children or people unfamiliar 

with these instructions to use the product. Local 
regulations can restrict the age of the operator.

3.  Never operate the product while people, especially 

children or pets are nearby.

4.  Keep in mind that the operator or user is responsible 

for any accidents or hazards occurring to other people 
or their property.

Preparation

1.  While operating the product always wear substantial 

footwear and long trousers. Do not operate this 
product when barefoot or wearing open sandals. 
Avoid wearing clothing that is loose fitting or has 
hanging cords or ties.

2.  Thoroughly inspect the area where the product is to 

be used and remove all objects which could be thrown 
by the product.

3.  Before use, always visually inspect to see that the 

blade, blade bolt and the blade assembly are not worn 
or damaged. Replace worn or damaged components 
in sets to preserve balance. Replace any damaged or 
unreadable labels.

4.  Ensure the switch is in the off position before inserting 

the battery pack. Inserting the battery pack into a 
machine that is switched on can result in injury.

General Operation

1.  Use the tool only with specifically designated battery 

packs. Use of any other battery packs will increase 
the risk of injury and fire.

2.  Only operate the product in daylight or in good 

artificial light.

3.  Do not expose tool and charger to rain or wet 

conditions. If a tool or charger is exposed to moisture 
it will increase the risk of electric shock.

4.  Avoid operating the product on wet grass.
5.  Always be sure of your footing on slopes.
6.  Walk, never run.
7.  Mow across the face of slopes, never up and down.
8.  Exercise extreme caution when changing direction on 

slopes.

9.  Do not mow excessively steep slopes.
10. Use extreme caution when reversing or pulling the 

product towards you.

11. Detach the battery pack and stop the blades if the 

product has to be tilted for transportation, when 
crossing surfaces other than grass and when 
transporting the product to and from the area to be 
mowed.

12. Never operate the product with defective guards or 

shields or without safety devices in place such as 
deflectors or grass collector.

13. When switching on motor keep feet well away from 

blades.

14. Do not tilt the product when switching on the motor, 

GENERAL SAFETY WARNINGS

Summary of Contents for LM F23
















Reviews: