Yard force LH G40, Original Instruction

Page: 10 / 14

18 19
SYMBOLS
Warning symbols on the battery pack
To reduce the risk of injury, user must read
instruction manual carefully.
Do not throw into water.
Do not throw on fire.
Do not subject the battery to strong sunlight
over long periods of time. Do not leave on a
heater (max.45 ° C).
Batteries contain Li-ion. Do not dispose of
waste batteries in domestic waste. Contact
local authority to find out how to dispose of
batteries.
The product complies with the applicable
European directives and an evaluation
method of conformity for these directives
was done.
WEEE symbol. Waste electrical products
should not be disposed of with household
waste. Please recycle where facilities exist.
Check with your Local Authority or local
store for recycling advice.
Model LH G60
Voltage 40 V
No load speed 1400 rpm
Max. cutting capacity 28 mm
Blade length 600 mm
Measured sound power level(LwA) 92.65 dB(A) K=3.0 dB(A)
Guaranteed sound power level(LwA) 96 dB(A)
Net weight 2.79 kg
Vibrations 1.81 m/s
2
K=1.5 m/s
2
Battery pack Model B0P-SP04-4025ZA
Battery capacity 40 V , 2.5 Ah
Battery charging time. 50 min
Battery charger Model
VDE: B0Q-SP03-4030ZA
BS: B0Q-SP03-4030ZB
Input 220-240 V AC, 50/60 Hz 160W
Output 40 V , 3 A
Protection class II
The sound values have been determined according to noise test code given in EN 60745-2-
15, using the basic standards EN ISO 11094 and EN ISO 3744. The noise figures quoted are
emission levels and are not necessarily safe working levels.
Factors that influence the actual level of exposure of work-force include the characteristics
of the work room, the other sources of noise, etc. i.e. the number of machines and other
adjacent processes, and the length of time for which an operator is exposed to the noise.
Also the permissible exposure level can vary from country. This information, however, will
enable the user of the machine to make a better evaluation of the hazard and risk.
Wear hearing protection! The sound intensity level for the operator may exceed 80 dB (A)
and ear protection measures are necessary!
The declared vibration value has been measured in accordance with a standard test
method (according to EN 60745-2-15) and may be used for comparing one product with
another. The declared vibration value may also be used in a preliminary assessment of
exposure. This tool may cause hand-arm vibration syndrome if its use is not adequately
managed.
TECHNICAL DATA