background image

24

25

INSTALLATION

Assmebly the Grass Catcher

Alternatively, you can also use the scarifier without a 
Grass Catacher. The plant residues removed by the 
roller then remain on the ground and can be removed 
or distributed as mulch, depending on their condition.

You have successfully assembled the Handle Bar.

You have completely assembled the scarifier.

1.  Pull the Grass Catcher 

21

 onto the Grass Catcher Frame 

19. Make sure that the handle is on the outside.

2.  Fasten the Grass Catcher to the Grass Catcher Frame with 

the clamping straps.

3.  Lift the cover flap 

17

 (see fig. C)

4.  Hang the Grass Catcher in the scarifier.

7.  Turn one quick release 

6

 onto each screw.

8.  Turn the quick release clamps onto the thread until they 

are about 5 mm away from the Lower Handle Bar.

9.  fold the quick releases upwards so that they are close to 

the Upper Handle Bar.

10. Put the Cable Protection 

23

 on the Handle Bar 

1

.

11. Hold the Handle Bar to the Upper Handle Bar so that the 

holes are aligned.

12. Connect the Handle Bar to the connecting tube by also 

using two screws, nuts and quick release.

13. Secure the power cable 

22

 by fixing it with the two cable 

clamps 

20

.

OPERATION

 

WARNUNG! 

Warning

Danger of injury!

The scarifier uses a fast rotating roller with sharp blades or 
tines. You could injure yourself or others if handled carelessly. 
Small objects (stones, sticks, wires, bones, etc.) can be 
thrown away by the rotation of the roller. This can cause 
serious injuries to yourself or other people. Furthermore, the 
scarifier is under power. Incorrect handling may result in a 
short circuit, explosion or electric shock.

 

– Do not use the scarifier in rain or thunderstorms.

 

– Check the terrain on which you wish to use the scarifier. 

Remove stones, sticks, wires, bones and other foreign 
bodies that could be caught and thrown away.

 

– Never use the scarifier while persons, especially children, 

or animals are nearby.

 

– Before each use, always check visually whether the 

working tools and bolts are worn or damaged. Only 
replace worn or damaged tools completely to avoid 
imbalance.

 

– Only work with the scarifier in daylight or under good 

artificial lighting.

 

– Wear gloves when changing the roller to avoid injuries.

 

– Only move the scarifier at walking speed.

 

– Hold the scarifier firmly by the handlebars with both hands.

 

– Be particularly careful when reversing the scarifier or 

pulling it towards you.

 

– Avoid using the scarifier when the grass is wet or exercise 

special care to avoid slipping.

 

– Always ensure that you stand securely, especially on 

slopes.

Summary of Contents for GLS36L





















Reviews: