background image

20

21

OPERATION

Clearing the impeller from debris.

WARNING:

 

Unplug the machine before clearing the impeller, use gloves.

Unscrew the knob of the impeller access door.
Wearing gloves, carefully clear the impeller from debris. Close the access door and hand 
tighten the screw, no force is needed.

Organic materials such as leaves contain a large amounts of water that can cause them to 
stick to the inside of the suction tube. To reduce sticking, the material should be left for a few 
days to dry out.

Rake function

The integrated rake will help to loosen debris between gravel.

MAINTENANCE AND STORAGE

WARNING:

 

Never use water for cleaning your product, use only a dry cloth. Do not clean 

with chemicals or solvents, some can destroy critical plastic parts.
Always wear gloves to remove debris from this product

Cleaning debris

1.  Switch off and disconnect from the mains electricity supply before cleaning your product.
2.  Always empty the collection bag, using the zip.
3.  Unscrew the Impellor access release (3) anticlockwise, until the door opens.
4.  Wearing gloves, carefully rotate the fan and remove debris by hand. Clean the fan with a 

soft brush ensuring it is free from debris.

5.  Clean the tube with a soft brush or cloth.
6.  Close up the motor housing unit by tightening the impellor access release screw until 

secure (do not overtighten).

7.  Clean the air vents with a soft brush.
8.  Turn over the product and carefully check the tube for debris.
9.  Refit the collection bag.

Storing Your Product

 

-

Loosen all screw connections of the suction hose and rinse all parts with clean water.

Always store the product in a dry place ensuring the cable is not likely to be damaged on 
sharp edges etc.

Maintenance

Our machines have been designed to operate over a long period of time with a minimum of 
maintenance.
Continuous satisfactory operation depends upon proper machine care and regular cleaning.
Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition.

1.  Check the collection bag frequently for wear or deterioration.
2.  Replace worn or damaged parts.
3.  Use only genuine replacement parts and accessories.
4.  Store the appliance in a dry place.

Disposing of the machine

Machines which are labelled with the this symbol must not be disposed of in household 
rubbish. You must dispose of such old electrical and electronic appliances separately.
Please check with your local authority about the possibilities for correct disposal. You will 
thus help to minimise damage to the environment.

Summary of Contents for EB U30













Reviews: