8
9
Replace damaged or unreadable labels.
- Before use, check the supply and extension cord
for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the
supply immediately.
DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
Do not
use the machine if the cord is damaged or worn.
- Never operate the machine while people, especially
children, or pets are nearby.
OPERATION
- Before starting the machine, make certain that the
feeding chamber is empty.
- Keep your face and body away from the feed intake
opening.
- Do not allow hands or any other part of the body or
clothing inside the feeding chamber, discharge chute,
or near any moving part.
- Keep proper balance and footing at all times. Do not
overreach. Never stand at a higher level than the base
of the machine when feeding material into it.
- Always stand clear of the discharge zone when
operating this machine.
- When feeding material into the machine be extremely
careful that pieces of metal, rocks, bottles, cans or
other foreign objects are not included.
- If the cutting mechanism strikes any foreign objects
or if the machine should start making any unusual
noise or vibration, immediately shut off the power
source and allow the machine to stop. Disconnect the
GENERAL SAFETY WARNINGS
machine from the supply and take the following steps
before restarting and operating the machine:
- inspect for damage;
- replace or repair any damaged parts;
- check for and tighten any loose parts.
- Do not allow processed material to build up in the
discharge zone; this may prevent proper discharge
and can result in kickback of material through the
intake opening.
- If the machine becomes clogged, shut-off the power
source and disconnect the machine from supply
before cleaning debris.
- Never operate the machine with defective guards or
shields, or without safety devices, for example debris
collector in place.
- Keep the power source clean of debris and other
accumulations to prevent damage to the power source
or possible fire.
- Do not transport this machine while the power source
is running.
- Stop the machine, and remove plug from the socket.
Make sure that all moving parts have come to a
complete stop
- whenever you leave the machine;
- before clearing blockages or unclogging chute;
- before checking, cleaning or working on the
machine.
- Switch-off the machine before attaching or removing
the bag.
GENERAL SAFETY WARNINGS
