Yanmar SV26, User Operation And Maintenance Manual

Page: 166 / 205

6 Maintenance by the operator
149
Crack
1 = Repair if over 60 mm
2 = Not yet to be repaired
• If a crack appears between the track attach-
ment inserts, repair it if the length of the crack
reaches 60 mm. If the interior steel cable is ex-
posed, repair the track immediately even if the
crack is a small one.
• If the length of the crack is less than 30 mm
or if the depth of the crack is less than 10 mm,
you do not need to repair the track.
• To find out whether the track must be replaced, repaired or you can continue to use it, contact
your YANMAR dealer.
6.4.2 Track replacement
• If a track (or both tracks) needs to be replaced, contact your dealer.
• A new track must be checked for the first time after 30 hours.
6.4.3 Tension check
1. Move the machine so that the seal on the internal sur-
face of the track is placed in the centre of the upper
chassis.
A = Mark inside the track
1 = Cover
2 = Idle wheel
2. Raise the machine with the equipment by activating
the command lever.
WARNING
Be sure to perform the track tension verification on a firm and even surface. It is strictly
forbidden to be positioned under the machine for the duration of the operation.