Yanmar SV26, User Operation And Maintenance Manual

Page: 133 / 205

15 Transporting the machine
116
1. Check the condition of the transport vehicle surface. If the surface is greasy, it must be
cleaned before installing the machine on the transport vehicle.
Note
If the transport vehicle surface is steel, provide a non-slip mat or spacers to prevent the
machine tracks from slipping.
2. Check the W
L
L
4
of the tie-down points of the transport vehicle, it must be at least the W
L
L
4
recommended for tying down the accessories.
D Lashing record, page 184
3. Check the location and condition of the machine tie-down points.
4. Tie-down the machine at the points provided for that purpose and that are indicated on the
machine. YANMAR CONSTRUCTION EQUIPMENT EUROPE recommends securing the ma-
chine according to the diagonal direct tie-down method respecting the angles shown below.
4.
Working Load Limit (WLL)
Angle Value in degrees
α
20°-60°
β 10°-60°
3 Warning labels, page 6
IMPORTANT
If other tie-down methods are used, YANMAR CONSTRUCTION EQUIPMENT EU-
ROPE does not guarantee the machine tie-down.
The driver must ensure that the angles α and β are determined so that there is no deflec-
tion of the tie-down accessories.