Yanmar SK1050 Operator'S Manual Download

Page: 96 / 97

SK1050 Operator’s Manual

Support - 95

Registration

Support

Registration

If your equipment was purchased through a Ditch Witch® dealer, it is already registered. If you purchased

from any other source, please email [email protected] or fill out the

registration card located in the back of the parts manual. Registration enables you to receive updates on

this equipment as well as information on new products of interest.

Procedure

Notify your dealer immediately of any malfunction or failure of Ditch Witch® equipment.

Always give model, serial number, and approximate date of your equipment purchase. This information

should be recorded and placed on file by the owner at the time of purchase.

Return damaged parts to dealer for inspection and warranty consideration if in warranty time frame.

Order genuine Ditch Witch replacement or repair parts from your authorized Ditch Witch dealer. Use of

another manufacturer’s parts may void warranty consideration.

Resources

Publications

Contact your Ditch Witch dealer for publications and videos covering safety, operation, service, and repair

of your equipment.

Ditch Witch® Training

For information about on-site individualized training, contact your Ditch Witch dealer.

Summary of Contents for SK1050


































































































Search results

Summary of Contents for SK1050

Reviews:

Related manuals for SK1050

Brands by name

Popular brands

Yanmar SK1050, Operator'S Manual

Search results

Summary of Contents for SK1050

Reviews:

Related manuals for SK1050

Brands by name

Popular brands