Yanmar SK1050 Operator'S Manual Download

Page: 23 / 97

Prepare - 22

SK1050 Operator’s Manual

Prepare Jobsite

Locate Utilities

Notify One-Call Services

Mark proposed path with white paint and have underground utilities located before working.

• In the US or Canada, call 811 (US) or 888-258-0808 (US and Canada). Also contact any local utilities

that do not participate in the One-Call service.

• In countries that do not have a One-Call service, contact all local utility companies to have

underground utilities located.

Verify Underground Utilities

Have an experienced locating equipment operator sweep area within 20’ (6 m) to each side of proposed

excavation to verify previously marked line and cable locations. Mark location of all buried utilities and

obstructions.

Locate Overhead Lines

Note location and height of all overhead lines in jobsite and ensure that equipment maintains proper

distance from live lines.

Overhead electrical lines. Contact will cause death or

serious injury. Know location of lines. Stay away.

Summary of Contents for SK1050


































































































Search results

Summary of Contents for SK1050

Reviews:

Related manuals for SK1050

Brands by name

Popular brands

Yanmar SK1050, Operator'S Manual

Search results

Summary of Contents for SK1050

Reviews:

Related manuals for SK1050

Brands by name

Popular brands