Yanmar SK1050 Operator'S Manual Download | Manualshive

Page: 58 / 97

background image

SK1050 Operator’s Manual

Transport - 57

Haul

Haul

Inspect Trailer

• Check hitch for wear and cracks.
• Check battery for 12V charge.
• Inspect lights for cleanliness and correct operation.
• Inspect reflectors and replace if needed.
• Check tire pressure.
• Check lug nut torque.
• Ensure trailer brakes are adjusted to come on with tow vehicle brakes.
• Check trailer bed for cracks.

Misuse of machine can cause death or serious injury.

Read and understand operator’s manual and all other safety instructions

before use. Know how to use all controls.

To help avoid injury:

• Read trailer operator’s manual before loading or transporting machine.
• Ensure tow vehicle has proper tow capacity rating.
• Attach trailer to vehicle before loading or unloading.
• Load and unload trailer on level ground.
• To help prevent trailer sway, load trailer so that 10-15 percent of total vehicle weight (equipment

plus trailer) is on tongue.

• If loading onto tilt-bed trailer, be prepared for trailer to tilt.

«
...
56
57
58
59
60
...
»

Summary of Contents for SK1050


































































































Reviews:

No comments

Related manuals for SK1050

Brand: jcb Pages: 31

Brand: RHINO Pages: 56

Brand: Cub Cadet Pages: 180

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands