8
YZ-S320
Instruction Manual
Instruction Manual
(4) Brush disc height adjustment (as shown in the figure)
(5) Roller brush height adjustment (as shown in the figure)
Adjust the brush height in clockwise direction;
Please adjust the disc brush to a reasonable height. If it
is too low, it will increase the power consumption and
accelerate the wear of the disc brush
(3) Instructions for use:
A. Before use, please check whether the tire rotation is flexible, whether the fasteners are
fastened reliably, and whether the disc brush belt rotates normally.
B. Please adjust the height of roller brush and disc brush to proper position before use.C.
Do not reverse the car when the roller brush works, so as to avoid damage to the motor
and controller.
D. When the power is insufficient, the control circuit of the machine will automatically
stop the work of rolling brush and disc brush, but it can work after restarting. Do not
turn on and off repeatedly to avoid damaging the battery.brushes, but it can work after
restarting; do not switch on the machine repeatedly to avoid damaging the battery.
Summary of Contents for YZ-S320
Page 2: ...1 ...
