![background image](http://html.mh-extra.com/html/avalanche/srd20/srd20_assembly-and-operating-manual_3024221001.webp)
english
Assembly & Operating Manual
SRD20 - Snow Rake Deluxe
ASSEMBLY INSTRUCTIONS:
a. Attach one snow rake pole (3) to the snow rake head (2) by pushing the silver snap button on the
pole and putting the pole in the large hole in the snow rake head (3). The silver button should lock
into
place.
b. Attach the other four poles by pushing in silver button on pole & fitting into the end of another pole
until it lock in place.
c. Attach Vinyl end grip (4) onto end of last pole (this should be a snug fit)
For best results use on fresh snow – to help prevent Ice Dams.
Operating Instructions:
a. Place the rake head with poles attached approximately 1 ft. up on roof, pull down the snow, repeat
this process 1 ft. at a time.
*(If resistance occurs, STOP, Readjust & repeat process)*
WARNING! Keep away from electrical wires. ** THIS PRODUCT DOES NOT REMOVE ICE DAMS **
US/Canada: Visit
www.avalanche-snow.com
Europe: Visit
www.avalanche-snow.eu
for Parts & Accessories for
your Avalanche!
Limited Warranty:
Avalanche Manufacturing warrants this equipment to be free from defects in material and workmanship under normal
use. *THIS PRODUCT DOES NOT REMOVE ICE DAMS* This warranty is extended to the original purchaser for a
period of 6 months from the date of purchase and is applicable only when the equipment is assembled and operated
in accordance with factory recommendations. The warranty does not extend to damage or wear caused by misuse,
abrasion, corrosion, negligence, accident, faulty assembly or tampering in a manner to impair its normal operation.
Return Policy:
All returns must be made within 30 days from the date of purchase. There is a 15% restocking fee that will be applied
to ALL orders unless covered by our warranty listed above. No freight charges will be refunded.
Return Procedure:
Requests for a return must be authorized through Avalanche prior to returning merchandise. Please call our toll free
number 1-800-378-3088 for a return authorization number.
Avalanche! Products by Rhino Manufacturing, Inc.
US/Canada: Toll Free: 800-378-3088
Email: [email protected]\Web: www.avalanche-snow.com
Europe: 011 47 930 59 734 Website: www.avalanche-snow.eu
Avalanche ! Produits par Rhino Manufacturing, Inc.
US/Canada: Appel gratuit : 800-378-3088
E-mail : [email protected]\Web: www.avalanche-snow.com
Europe: 011 47 930 59 734 Site Web: www.avalanche-snow.eu
Avalanche! Produkte von Rhino Manufacturing, Inc.
USA/Kanada: Gebührenfrei: 800-378-3088
E-Mail: [email protected]\Web: www.avalanche-snow.com
Europa: 011 47 930 59 734 Webseite: www.avalanche-snow.eu
Avalanche! - Produkter av Rhino Manufacturing, Inc.
US/Canada og Tollfri: 800-378-3088
E-post: [email protected] / Nettside: www.avalanche-snow.com
Europa: 011 47 930 59 734 Nettside: www.avalanche-snow.eu
DISASSEMBLE & STORAGE:
a. Take all poles apart
b. Snap poles into black bracket (1) (with storage clip facing upward)
c. Snap rake head onto black brackets storage clip (see figure 1.)
ITEM PART # NAME QTY
1
SR-BRKT
Snow Rake Storage Bracket
1
2
SR-HD
Snow Rake Head
1
3
SR-HE
Snow Rake Handle Extensions
5
4
SR-VEG
Snow Rake Vinyl End Grip
1
5
SR-WK
Snow Rake Wheel Kit (2 Wheels)
1 kit = 2
Hanging Holes for Compact Storage
4
3
1
SnowRake! Pro 16 & Deluxe 20
Warranty
All Avalanche! and SnowRake! products are warranted for 30 days from purchase.
Products are warranted against manufacturer defects only. If you need to return a product please call Avalanche
for a RMA (Return Merchandise Authorization) number prior to shipping. 1-800-378-3088
SnowRake! Pro 16 & Deluxe 20
Owner’s Manual
Assembly:
1. Place the snow rake (as is from box) on a flat surface. Make sure to place it horizontally—left to
right—in front of you so the writing on the snow rake head (SR-HD) is legible.
To Remove Snow Rake Head (SR-HD):
2. Take your dominant hand and grab the middle-top of the snow rake head (SR-HD) where it attaches to
the black storage bracket (SR-BRKT). Tilt the top of the snow rake toward your body slightly—about 90
degrees.
3. With your less dominant hand, push against the snow rake poles (SR-HE) and bracket (SR-BRKT) in the
center behind the rake head (SR-HD). At the same time pull—with your dominant hand—the snow rake
head toward your body.
To Finish Assembly of Rake:
4. Pull the snow rake poles (SR-HE) out of the storage bracket (SR-BRKT) one by one.
5. Attach one snow rake pole (SR-HE) to the snow rake head (SR-HD) by pushing the silver button on the
pole and putting the pole in the large hole in snow rake head (SR-HD). The silver button should lock into
place.
6. Attach other poles together by pushing silver button on pole and fitting into end of another pole until
it locks into place.
7. When completed, take the black Vinyl End Grip (SR-VEG) and push onto end of last pole (*note: this
should be a snug fit).
For best results use on fresh snow
2
5
Index
File
Name
Part
Name
Qty.
1
SR-BRKT
Snow Rake Storage Bracket
1
2
SR-HD
Snow Rake Head
1
3
SR-HE
Snow Rake Handle Extension
4
(5 with Deluxe 20)
4
SR-VEG
Snow Rake Vinyl End Grip
1
5
SR-WK
Snow Rake Wheel Kit
(Deluxe 20 only)
5th pole
for D
elux
e 20
RETURN POLICY:
All returns must be made within 30 days from the date of purchase. There is a 15% restocking fee
that will be applied to ALL orders unless covered by our warranty listed above.
No freight charges will be refunded