27
VF2400
Removing presser foot
(1) Loosen the screws ② of the lifter lever stop ① , the
screws ④ of the collar ③ , and the screw ⑧ of the
presser foot ⑦ .
(2) Push down the lifter lever ⑤ to remove the presser foot
⑦ .
Adjusting height of presser foot
(1) Push down the lifter lever ⑤ to make the height from
the top of the stitch plate to the bottom of the presser
foot to 7.0 mm (with spreader, needle distance 5.6 mm
on VF2500).
(2) Tighten the screws ② securely.
(3) With keeping that, make the clearance between the end
of the presser bar bushing ⑥ and the top of the collar
③ to 0.2 mm.
(4) Tighten the screws ④ securely.
After adjusting, push down the lifter lever ⑤ fully to check
the height of the presser foot.
Presser foot lift depends on the machine model or needle
distance.
See “7. Specifications” in detail.
6. Adjustments
Fig. 6-10
Fig. 6-11
①
②
⑤
stitch plate
6.4 Removing presser foot and presser foot lift
③
④
⑥
⑦
0.2 ㎜
7.0 ㎜
(8.0 ㎜ )
⑧
