![background image](http://html.mh-extra.com/html/yamato/vf2400-class/vf2400-class_instruction-manual_905403029.webp)
22
VF2400
5. Proper operation
5.11.2 Feeding amount of elastic tape
Fig. 5-17
②
①
Fig. 5-18
③
④
⑤
⑥
L
S
Before operating, ALWAYS turn the power switch OFF
and check that the machine has already stopped.
Loosen the nut ① and adjust feeding amount while check
-
ing the pointer ② and the graduations of the clutch lever
③ as below.
● To increase feeding amount, turn the adjusting screw ④
clockwise and move the pointer ② in the direction “L”.
● To decrease feeding amount, turn the adjusting screw
④ counterclockwise and move the pointer ② in the di
-
rection “S” .
Tighten the nut ① securely after adjusting.
If required feeding amount cannot be obtained by above
adjusting with the adjusting screw ④ , loosen the screw ⑤
and adjust it as below.
● To decrease feeding amount, turn the adjusting screw
⑥ clockwise.
● To increase feeding amount, turn the adjusting screw ⑥
counterclockwise.
After tightening the nut ① , turn the adjusting screw ④
clockwise to tighten it securely without play.
ATTENTION