Yamato SM 234, Instruction Manual, Page: 7 / 14

cod. 99850 - mod. SM 234
condition that may affect its operation. A guard or other part that that is damaged should be
properly repaired by an authorized service center unless otherwise indicated elsewhere by
dealer.
•
Warning : Use not authorized spare parts of other machines can cause incidents.
•
Repair your tool only by Authorized Service Center.
MACHINE DESCRIPTION
1. Collet
2. Collet nut
3. Shaft collar
4. Spindle lock
5. Accessible brushes
6. Variable speed 7. Power cable
8. ON/OFF switch
9. Locking chuck (flexible extension)
10. Spindle lock (flexible extension)
11. Handle
12. Fitting collar
OPERATING INSTRUCTIONS
a Fitting and removing the accessories
FITTING
Fit the required accessory by unscrewing the spindle, keeping the grinder blocking button pressed using
the supplied spanner to help you.
Depending on the diameter of the cutter rod that is being used, fit the suitable cutter holder grippers.
Tighten the assembly carefully: cutter, cutter holder, spindle, keeping the blocking button pressed and
tightening with the spanner.
REMOVAL
To remove the accessories follow the above instructions in reverse order.
FITTING THE FLEXIBLE EXTENSION