13
Operation Method
Apparatus/Liquid Sterilization Course
4. The control system in the control platform
has the function of data memory, which can
store the sterilization temperature and time of
the last use for the next continuous use. For the
first use, may need to adjust the sterilization
temperature and time, it can be adjusted
according to the following steps:
①
Set the sterilization temperature: press the
set key on the control panel (Figure 9), the
sterilization temperature indicator lamp on the
panel lights up, and SP appears in the display
screen (Figure 10). Press the up and down keys
(Figure 11) to adjust the required
sterilization temperature value. After the
adjustment, press the set key twice to store and
confirm the new sterilization temperature data
(Figure 12).
②
Set the sterilization time: press the set key on
the control panel (Figure 13), the sterilization
time indicator lamp on the panel lights up, and
ST appears in the display screen (Figure 14).
Press the up and down keys
(Figure
15) to adjust the required sterilization time
value. After the adjustment, press the set key
twice to store and confirm the new sterilization
time data (Figure 16).
The articles need to be sterilized should be
properly wrapped and stacked in the inner
barrel successively (Figure 17-1). Do not put
the easily expanded or unwrapped grain or strip
articles into the barrel to sterilize. When
stacking the sterilization articles, it is necessary
to keep off the vent holes such as of the safety
valve and the vent valve (Figure 17-2) to avoid
the unsafe accidents caused by blocking the
vent holes.
When the sterilization temperature and time are
confirmed, close the cover, turn the cover CW
until the upper and lower handles are all closed
(Figure 18), and the interlock indicator lamp
blinks; then press the RUN key on the control
panel, the working lamp lights up, and the
heater in the sterilizer starts to work.
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
Figure 17-1
Figure 17-2
Figure 18
Neatly
stacked
Do not
block the
holes