
14
6. Maintenance procedures
Daily
inspection/maintenance
Warning
●
Be sure to pull out the power cord unless necessary before trying to do inspection and maintenance
works.
●
Never try to disassemble the unit.
Caution
●
Wipe off any dirt with a tightly wrung soft cloth. Never try to clean the unit with benzene, thinner or
scouring powder, or rub with a scrubbing brush. Deformation, degradation or discoloration may
result.
7. When the unit is not to be used for a long time
or when disposing
When the unit is not to be used for a long time or when disposing
Caution
Warning
When the unit is not going to be used for a long
time
●
Turn the power to off and pull out the power
cord.
When disposing the unit
●
Do not leave the unit in the area where
children may have access.
●
Be sure to remove handles before disposing
the unit to prevent the doors from locking.
●
In general, dispose the unit as a bulky waste.
Notes about disposition
Always pay attention to the preservation of the global environment.
・
We highly recommend taking the unit apart as far as possible for separation or recycling to
contribute to the preservation of the global environment. Major components and materials for the
unit are as follows:
Names of major components
Major materials
Major components
Chassis
Steel sheet iron, melamine resin baking finish
Nameplates
Polyethylene (PET) resin film
Major parts of shaker
Shaking table
Stainless steel plate
Major electric parts of shaker
Motor
Motor case, rotor, shaft: made of iron, bracket: made of
aluminium, coil: copper (insulation coating with resin)
Power cord & wiring materials,
etc.
Wiring materials and boards with resin cladding