27
CZ8000
6.Adjustments of sewing machine
6.8 Position of presser foot
Install the bottom surface of the presser foot parallel to
the stitch plate when looking from the front.
Slanted presser foot can cause feed scratch mark.
To set back and forth position, adjust the clearance be-
tween needle drop of the presser foot and that of the
stitch plate to 0.2 - 0.3 mm as shown in Fig. 6-24.
Loosen the screw ① to make adjustment.
Fig. 6-24
0.
2 - 0
.3
㎜
①