![background image](http://html1.mh-extra.com/html/yamato/cz8000/cz8000_instruction-manual_4656420015.webp)
2. Installation
5
CZ8000
10 - 20㎜
①
②
③
④
To prevent you from getting injured and a material from
being caught by the belt, be sure to install the belt cover.
2.4 Belt cover
(1) Install the auxiliary belt cover ⑤ as shown in the
figure.
(2) Install the belt cover ⑥ as shown in the figure.
2.5 Eye guard and finger guard
To ensure safe use, ALWAYS install the eye guard ⑦ and the finger guard ⑧ on the prescribed position dur
-
ing operation.
2.3 Hanging belt
Use the V-belt of M-type.
(1) Hang the belt ① on the machine pulley ②, and then
on the motor pulley ③ while rotating the machine pul
-
ley.
(2) Adjust the belt tension so that the belt has 10 - 20㎜
slack when its center is pressed with 10 N .
(3) Lock the motor with the adjusting bar ④.
Fig. 2-6
Fig. 2-7
Fig. 2-8
⑤
⑥
Before hanging belt, Always turn the motor switch OFF
and check that the motor has already stopped.
⑦
Fig. 2-5
⑧