background image

PPC-200(W)

            Operation Manual

YCO-1047-07-04

SAFETY INSTRUCTIONS

Before using the scale, carefully read, understand, and follow the “Safety Instructions” described in this manual.  Observe the 

advice given in the “Operations” section to ensure proper operation.  Keep this operation manual handy for ref er ence. 

1)   DO NOT SHOCK LOAD the scale, Never step on or sit on the scale.  Not only will the scale be damaged, but you may    

also be injured.

2)   DO NOT TWIST platform this will damage the scale.
3)   DO NOT APPLY DIRECT WATER SPRAY to underside of scale!!
4)   Do not operate the scale if there is smoke or a burnt smell coming from the scale.  Remove the batteries or unplug the  

AC adaptor immediately.  After making sure that there is no danger, consult your dealer.

  Never try to repair the scale  

by yourself.

5)   This scale is 

not

 an explosion-proof model.  Do not use the scale in an atmosphere containing fl ammable gases or  

 

explosive fumes.  A fi re or an explosion can result.

6)   Place the item to be weighed in the center of the platform.  Items placed on the edge of the platform may fall off and  

 

cause injury.

7)   When weighing a heavy, large or unbalanced item, make sure the item is stable on the platform, otherwise, an accident  

may occur.

8)   When carrying or moving the scale, be sure to hold it by the bottom of the base with both hands.  If you hold it by the 

platform, the platform or the platform support may become detached causing the scale to fall.  This will damage the scale.  
The platform is designed for easy removal and clean-up.

9)   Do not insert your fi nger into the gap or holes in the scale.  You may be injured.
10) The PPC-200(W) uses a liquid crystal display.  If the LCD breaks and the liquid leaks from the LCD, do not touch it with 

your fi ngers.  The liquid is toxic if ingested.  Be especially careful around small children.

To prevent damage to the scale

1)   Do not push the indicator or keys with sharp objects.  They may break or puncture the switch mem brane panel.
2)   Use the specifi ed power supply and choose a suitable environment.  If you do not, the weight read ings may be in ac cu rate 

and the scale may be damaged.

3)   The scale is a sensitive weighing instrument, avoid physical shocks.  If you drop something on the scale, step on the plat-

form, or drop it, the scale may be damaged and lose accuracy.

4)   If the scale becomes dirty, wipe it with a soft cloth.  For stubborn stains, apply a little neutral de ter gent and then wipe the 

scale with a dry cloth.  Do not use thinner, benzene, hot water, or chemical agents, all of which can cause deformation, dis-
coloration, or deterioration of the scale.

5)   Never remove the case.  The fi ne adjustment section may be damaged and you may be injured by sharp edges on the 

internal parts.

6)   Do not place the scale upside down on the scale platform.
7)   When the low battery indicator appears, replace all six of the batteries.  When installing the batteries, install them accord-

ing to the polarity markings in the case (+, -).  If the scale will not be used for a long period, remove the batteries.

To keep the scale working effi ciently

1)   Place the scale on a fl at stable surface that will support the scale and the load.
2)   Do not place the scale in an area exposed to direct sunlight or to wind currents from an air con di tion er, oth er wise, the 

weights will not be accurate.

3)   Do not place the scale near machines that create vibrations or electromagnetic disturbance, such as microwave ovens, 

portable phones, or large motors.  This will affect the accuracy.

4)   The operating temperature range is from –5°C to +35°C (23°F to 95°F).  Do not subject the scale to sudden tem per a ture 

changes; allow the scale to adjust to the new temperature before use.

5)   If the scale is sealed, do not break the seal.  If you break the seal, the scale will not be considered legal for trade.  In this 

case, contact your dealer.  

6)   Do not disassemble or modify the scale, you will void the warranty.  Modifi ed scales will not be legal for trade.
7)   The PPC-200 is not a washdown scale, it is splash-proof.  Do not use a water sprayer on the PPC-200 and do not use it in 

an extremely humid or dusty environment.

8)   The PPC-220W is a washdown scale, but is not a submersible scale.  Do not place the PPC-200W in water higher than 

the bottom of the housing.  Do not spray water up into the underside of the PPC-200W.

Summary of Contents for Accu-weigh PPC-200W














Reviews: