![background image](http://html1.mh-extra.com/html/taylor/the-biggest-loser-3865bl/the-biggest-loser-3865bl_instruction-manual_3964416001.webp)
Model 3865BL
Digital Kitchen Scale
Instruction Manual
Thank you for purchasing a Taylor® kitchen scale. Your Taylor® scale is an example of superior design
and craftsmanship. Please read this instruction manual carefully before use. Keep these instructions
handy for future reference.
For more information on NBC’s The Biggest Loser, or to join The Biggest Loser Club, please visit the
official Biggest Loser website at www.nbc.com/The_Biggest_Loser.com or www.biggestloserclub.com.
Get a free diet profile at www.biggestloserclub.com.
Battery Information
This scale operates on 1
– 3 volt CR2032 lithium battery (installed). There is a strip under the lithium
battery cover to prevent battery drain in shipping. Please remove the strip before continuing with these
instructions. Also, some models have a static cling label on the lens to prevent scratching. Please
remove before use.
Replace the battery when “Lo” appears on the display, or the readings grow dim or irregular. To replace
the battery:
1.
Use one 3 volt CR2032 lithium battery.
2.
Remove screw (or screws) from the battery compartment cover on the bottom of the scale and remove
the cover.
3.
Remove the old battery from the compartment.
4.
Place the new battery with the “+” sign up into the battery compartment.
5.
Replace the battery compartment cover and screw(s).
NOTE:
Please recycle or dispose of batteries per local regulations.
WARNING:
Batteries may pose a choking hazard. Do not let children handle batteries.
PRECAUTION:
Do not dispose of batteries in fire. Batteries may explode or leak. Remove the battery if
the scale will not be used for a long period of time.
General Weighing Operation
1.
Place the scale on a hard, level surface.
2.
Press the “ON/OFF” button to turn the scale on. The display will turn on, show “8888”, then zero when
it is ready for use. If the display does not
show zero, press the “TARE/▲” button to reset (tare) the scale.
The display will show “tArE”, then zero. The scale is ready for use.
3.
Your scale is set at the factory to weigh in pound/ounces. To switch between pound/ounces (lb oz)
and grams (g), press
the “UNIT/▼” button.
4.
Place the item to be weighed on the center of the platform. The weight will display. As you add weight,
the weight displayed increases.
5.
The scale will turn off automatically after approximately 1 minute of non-use or if there is no change in
weight after approximately 3 minutes. Press the “ON/OFF” button to turn the scale off manually.