4-15
Touch
[Exit]
to go back to the system menu.
By touching
[Drivers]
, the following screen appears and the driver settings can be
checked. The driver settings cannot be changed on this screen.
Touch
[Exit]
to go back to the
“Communication conf.”
menu.
Handling Precautions
The drivers displayed on this screen are used only when the application is
running.
When the application is not running, all the ports will use the Serial Driver
(Slave).
* Format of the Serial Driver (Slave)
CH0
: 9600bps, no parity, 1 stop-bit
CH1 to CH4 : Just after rebooting : 9600bps, Even parity, 1 stop-bit
After the application start: Settings of the application are active.
■
Self diagnostics
For the self diagnostics, please refer to
4-4 Self-Diagnostic Function (page 4-
18)
.
Chapter 4. CONNECTIONS AND SETUP
