The protective sheet on the panel front has a thin plastic film protecting the panel surface.
After the works such as mounting and wiring are completed, please remove it as follows:
Handling Precautions
Peeling off the protective film with your fingernail might scratch the surface
of the EST.
iii
CAUTION
Do not throw used batteries into fire or discard. If you discard them at
your site, follow regulations and rules stipulated by your local self-
governing body.
Do not short-circuit the batteries as they may overheat or catch fire
also, do not expose them to water.
When replacing the battery, please note the followings:
• Clock data, user touch switch adjustment data and user contrast
adjustment data will be initialized during battery replacement. In this
case, please reconfigure the settings.
• The trend data will be lost during battery replacement.
• The changes that have been made to the recipe data using the EST
will be lost during battery replacement.
In case of the EST’s system program of F/W (firmware) version R0021
or later, the changes are automatically written to the EST’s memory
during the application upload function of the AP Editor. In case of the
F/W version R0020 and earlier, the changes are written into the
memory by using the “Recipe data write” switch in the system menu.
When you discard the EST, discard it as industrial waste, following
regulations and rules stipulated by your self-governing body.
Request
Tape
PULL
Tape a cellophane adhesive
tape on the corner, and pull it in
the arrow direction as shown to
remove off the thin plastic film
together.
