32 (42)
Protecting the aluminium hull
When the aluminium hull is completely clean and dry, it can be protected against oxidation.
Spray Star brite Aluminum Polish
on the surface to be treated and spread it out with a soft,
lint-free cloth. We recommend that you treat your new boat with Star brite Aluminum
Protectant before launching it to prevent oxidation of the aluminium surfaces. Oxidation is a
natural reaction of aluminium against corrosion and only affects the appearance of the boat,
not its quality otherwise.
Useful tip:
When the boat has been washed with tap water, a thin chalk-like
layer of lime and minerals will remain on the boat’s surface after
it has dried. The problem can be eliminated by adding a few drops
of pine oil soap into a bucket of rinsing water, which will soften it.
Useful tip:
Water and lime stains on stainless steel rails and handles
disappear when you apply some
Lemon Pled
furniture spray.
Useful tip:
If the boat's ropes smell bad after the season, immerse them for a
couple of hours in a bucket of water with a bottle of apple vinegar
and a splash of fabric conditioner added. Allow the lines to dry
properly, and they will be as good as new.
NOTE!
Make sure that the cleaning, polishing and protective agents you
use are suitable for aluminium and the other surfaces you will
treat with them. Always follow the chemical manufacturer's
instructions.
Aluminium tread plates
The tread plates are of black anodised aluminium. Black anodised aluminium will fade
slightly in the sunlight. The warranty does not cover the replacement of faded tread plates,
because this is a feature of the product and not a fault.
Summary of Contents for Cross 75 Bow Rider
Page 1: ...Yamarin Cross 75 Bow Rider User manual...
Page 41: ...41 42 8 5 Wiring diagram...
Page 42: ...42 42...
