YAMARIN Cross 75 Bow Rider, User Manual

Page: 16 / 42

16 (42)
5.5 Engine and propeller
The maximum recommended engine power for the boat is 300 hp (221 kW) . Do not use the
boat with an engine that has an output higher than the kW limit given on the CE plate. Using
a more powerful engine than specified on the CE plate will void the boat’s warranty. Follow
the dealer’s instructions when choosing the propeller f
or your craft.
Yamaha F300 15 x 21” Saltwater Series 2 sds 6ce
Yamaha F150 15 x 17” Reliance
5.6 Prevention of water incursion and stability
5.6.1 Hull and deck through fittings and closing valves
The boat has a rainwater draining system, which means that rainwater is drained from the
undecked part of the boat when the boat is on the water. The system also functions when
the boat is out of water, provided that the bow is higher than the stern and closing valve is
open.
The rainwater drainage closing valve is located under the middle hatch of the aft seat. This
drain valve is meant to be shut only when at maximum load to prevent potential water
incursion.
In other loading conditions, the drain valve should remain open to let rainwater
drain from the boat .
The boat has a hand-operated bilge pump shown in the picture below. The hand-operated
bilge pump has a capacity of about
0.7 l per pull.
The boat is equipped with an electric bilge pump.
The switch of the bilge pump is dual-action:
-
Automatic action
-
Manual action
When the bilge pump is running, the switch is lit.
NOTE! Always keep the switch set to automatic action.
NOTE! If the light is lit, immediately check the boat's bilge and find out
the reason for the leakage. Take immediate corrective action.