YAMARIN Cross 49 Bow Rider Page 28 User Manual Download | Manualshive

Page: 28 / 42

background image

28 (42)

NOTE!

It is the owner's / user's responsibility to make sure that the
boat's mooring and anchoring equipment is suitable for the boat's
intended use.

5.10.5

Towing

When towing another boat, use a floating line that is strong enough for the task. Begin
towing carefully, avoid jerks, and do not overload the engine.

The owner of the boat should consider the measures necessary for securing the boat

’s

towrope.

If you are towing, or if your boat has to be towed, attach the towline to the bollards as per
the following image.

Attaching the towline to the bollards.

WARNING!

When towing, the towline is under high tension. If it should break,
the end that has snapped off may lash back at fatal speed. Always
use a thick enough rope and avoid the line of the towrope.

NOTE!

When towing another boat or being towed, always drive at low
speed. If the boat has a displacement hull, never exceed hull
speed while towing (speed before boat rises to plane).

NOTE!

The towline should always be fastened so that it can be
unfastened under load.

5.10.6

Trailer transport

Weight information for trailer transport can be found in the

technical specifications

. The

trailer's keel supports should carry most of the weight of the boat. Adjust the keel supports
so that the boat cannot slide from side to side. For more information on correct support and
trailer size, please turn to your dealer.

Clean the supports of sand and dirt, so they will not scratch the bottom of the boat. Double-
check that the trailer is securely coupled to the trailer tow hitch!

«
...
26
27
28
29
30
...
»

Summary of Contents for Cross 49 Bow Rider











































Reviews:

No comments

Related manuals for Cross 49 Bow Rider

Brand: Pro-Line Boats Pages: 71

2150 Dual Console

Brand: PURSUIT Pages: 68

Classic Runabout EP RTR

Brand: ProBoat Pages: 4

Brand: Regal Pages: 437

Brand: Pro-Line Boats Pages: 33

Brand: Williams Pages: 51

35 Express 2006

Brand: Pro-Line Boats Pages: 95

Brand: Grand Soleil Pages: 103

Brand: Sea-doo Pages: 20

Brand: X-TREME scooter Pages: 30

Brand: C&C Pages: 66

Brand: Pelican Pages: 10

Brand: Pelican Pages: 14

Brand: LIMESTONE Pages: 25

Brand: David Walters Pages: 13

Brand: Jet-Tern Marine Pages: 31

Brand: OceanPlay Pages: 26

Brand: Four winns Pages: 120

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands