Yamarin 80 Day Cruiser
31 (48)
Waste system of Yamarin 80 DC
1. Waste tank vacuum emptying
10. Manhole
2. Waste tank vacuum emptying hose
11. Thru fitting for water intake
3. Waste tank sea drainage
12. Valve for toilet water intake
4. Waste tank sea drainage valve
13. Waste tank vent
5. Sanitation hose from toilet to waste tank
14. Waste tank
6. Hose for water intake
15. Waste tank sensor
7. Flushing pump for toilet
8. Toilet
9. Monitor of the surface level in the septic tank
Empty the septic tank when you leave the harbour by using the suction disposal equipment.
The discharge shutoff seacock to the waste water tank is located next to it. The vent should
normally
always remain closed and it should only be opened when emptying the tank
into the sea.
Please find out which regulations are in force where you are using the boat in
relation to the discharge of grey water.
Mildly alkaline general detergents can be used for cleaning the waste water tank and its hoses.
Glycol can be used as an anti-freeze agent. However, the system must be as empty as possible
for storage in temperatures below zero.
Always keep the thru hull fitting valve to the waste water tank closed. Only open it if you
need to empty the tank into the sea where you are allowed to do so.
5.10.6
Anchoring and mooring
Always moor your boat carefully, even in sheltered places, because conditions can change
rapidly. Mooring lines should be equipped with absorbers to dampen any jolts. To prevent
abrasion, use fenders that are large enough. The location of the bollards is illustrated on the
image in the section on towing.
Summary of Contents for 600 Big Ride
Page 1: ...Yamarin 80 Day Cruiser 1 48 Yamarin 80 Day Cruiser OWNER S MANUAL ...
Page 46: ...Yamarin 80 Day Cruiser 46 48 8 5 Wiring diagram 8 5 1 Switch fuse panel ...
Page 47: ...Yamarin 80 Day Cruiser 47 48 8 5 2 Main switch ...
Page 48: ...Yamarin 80 Day Cruiser 48 48 8 5 3 Cabin light switches ...
