27
NOTE!
Do not spray water with a pressure washer on the caulking seam
under the fender list.
Pressurised water can damage the glued seam.
NOTE!
Do not spray water directly into the air intake grilles. The water could get into the boat and
into the structures.
The hatches of the glove compartment and instrument panel are made of plastic and can
be washed with soap water; never use solvents to clean them.
Cleaning the aluminium hull
First wash off loose dirt above the water line using Star brite Boat Wash in a Bottle
(a concentrated boat washing chemical, to be used in a mixture of 3 corkfuls per 10 l of wa
-
ter). Remember to dry the boat.
The waterline and bottom of the boat must be washed in temperatures of at least +10 °C,
and only after the hull is completely dry. For the waterline and the bottom, use Star brite
Aluminium Cleaner, which cleans the waterline and bottom of slime and grime.
Star brite Aluminium Cleaner is easy to use: Pour some cleaner in a plastic bucket and
brush the hull of the boat with vertical strokes from the bottom up to prevent trickling. Let
the cleaner take effect for 1–2 minutes (but do not let it dry). Rinse thoroughly. The cleaning
process can be enhanced and speeded up by rubbing the surface with a sponge or a brush
while the cleaner is applied. If you are working in the sunshine, only apply cleaner to an
area that you will have time to wash before it dries.
Protecting the aluminium hull
When the aluminium hull is completely clean and dry, it can be protected against oxidation.
Spray Star brite Aluminium Polish on the surface to be treated and spread it out with a
soft, lint-free cloth. We recommend that you treat your new boat with Star brite Aluminium
Protectant before launching it to prevent oxidation of the aluminium surfaces. Oxidation is
a natural reaction of aluminium against corrosion and only affects the appearance of the
boat, not its quality otherwise.
Useful tip:
If you wash your boat with tap water, it will leave behind a thin,
chalk-like de
-
posit of calcium and other minerals due to the water
hardness. This can be pre-
vented by mixing a few drops of
pine soap solution into a bucketful of rinsing
water.
Useful tip:
Water and lime stains on stainless steel rails can be removed using Lemon Pled furniture
spray.
Useful tip:
If the boat ropes smell bad after winter storage, immerse them
for a couple of hours
in a bucket of water with a bottle
of apple wine vinegar and a splash of fabric condi-
tioner mixed in. Let dry properly, and the ropes will be as good as new.
NOTE!
Make sure that the cleaning, polishing and protective agents you use are suitable for alu
-
minium and the other surfaces you will treat with them. Always follow the chemical manu
-
facturer’s instructions.
Summary of Contents for 62 BR
