Yamaha YZF-R1P 2001-2003, Owner'S Manual

Page: 88 / 133

PERIODIC MAINTENANCE AND MINOR REPAIR
6-31
6
2. Install the brake caliper bolt, and
then tighten it to the specified
torque.
EAU03294
Checking the brake fluid level
Insufficient brake fluid may allow air to
enter the brake system, possibly caus-
ing it to become ineffective.
Before riding, check that the brake fluid
is above the minimum level mark and
replenish if necessary. A low brake flu-
id level may indicate worn brake pads
and/or brake system leakage. If the
brake level is low, be sure to check the
brake pads for wear and the brake sys-
tem for leakage.
Observe these precautions:
● When checking the fluid level,
make sure that the top of the brake
fluid reservoir is level.
●
Use only the recommended quali-
ty brake fluid, otherwise the rubber
seals may deteriorate, causing
leakage and poor braking perfor-
mance.
●
Refill with the same type of brake
fluid. Mixing fluids may result in a
harmful chemical reaction and
lead to poor braking performance.
1. Brake pad wear indicator groove
Tightening torque:
Brake caliper bolt:
27 Nm (2.7 m·kgf, 19.5 ft·lbf)
Rear
1. Minimum level mark
Front
1. Minimum level mark
Recommended brake fluid: DOT 4
Rear Rear
U5PW10.book Page 31 Thursday, January 10, 2002 12:15 PM