Yamaha YZF-R1P 2001-2003, Owner'S Manual

Page: 76 / 133

PERIODIC MAINTENANCE AND MINOR REPAIR
6-19
6
8. Remove the coolant drain bolt to
drain the cooling system.
9. Loosen the radiator hose clamp
screw located at the left side of the
engine, and then pull off the hose
to drain the radiator.
10. After the coolant is completely
drained, thoroughly flush the cool-
ing system with clean tap water.
11. Install the coolant drain bolt, and
then tighten it to the specified
torque.
NOTE:
_
Check the washer for damage and re-
place it if necessary.
_
12. Connect the radiator hose, and
then tighten the clamp screw.
13. Pour the specified amount of rec-
ommended coolant into the radia-
tor and reservoir.
1. Coolant drain bolt
2. Clamp screw
Tightening torque:
Coolant drain bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
Antifreeze/water mixture ratio:
1:1
Recommended antifreeze:
High-quality ethylene glycol
antifreeze containing corrosion
inhibitors for aluminum engines
Coolant quantity:
Total amount:
2.45 L (2.16 lmp qt, 2.59 US qt)
Coolant reservoir capacity:
0.24 L (0.21 lmp qt, 0.25 US qt)
U5PW10.book Page 19 Thursday, January 10, 2002 12:15 PM