CHAS
4-54
EAS00662
INSTALLING THE FRONT FORK LEGS
The following procedure applies to both of the
front fork legs.
1. Install:
• front fork leg
Temporarily tighten the upper and lower
bracket pinch bolts.
NOTE:
NOTE:
Make sure the inner fork tube is flush with the
top of the handlebar holder.
2. Tighten:
• cap bolt
3. Adjust:
• front fork top end
4. Tighten:
• upper bracket pinch bolt
• lower bracket pinch bolt
WARNING
Make sure the brake hoses are routed prop-
erly.
5. Install:
• protector
6. Adjust:
• spring preload
• rebound damping
• compression damping
Refer to “ADJUSTING THE FRONT FORK
LEGS” in chapter 3.
28 Nm (2.8 m•kg, 20 ft•lb)
Front fork top end (standard)
YZ85: 24 mm (0.94 in)
YZ85LW: 0 mm (0.00 in)
22 Nm (2.2 m•kg, 16 ft•lb)
20 Nm (2.0 m•kg, 14 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
FRONT FORK