Yamaha YZ250 2022, Owner'S Service Manual

Page: 131 / 274

HANDLEBAR
4-37
12.Install:
• Throttle cable “1”
(to the tube guide “2”)
TIP
Apply the lithium-soap-based grease on the
throttle cable end and tube guide cable winding
portion.
13.Install:
• Roller “1”
•
Collar “2”
TIP
• Apply the lithium-soap-based grease on the
roller sliding surface and cable guide.
• Install the roller so that the “UPPER” mark “a”
faces upward.
• Pass the throttle cable in the groove “b” in the
roller.
14.Install:
•
Throttle cable cap “1”
•
Throttle cable cap screw “2”
15.Adjust:
•
Throttle grip free play
Refer to “CHECKING THE THROTTLE
GRIP” on page 3-5.
16.Install:
•
Cap cover “1”
17.Install:
• Brake master cylinder “1”
•
Brake master cylinder holder “2”
• Front brake master cylinder holder bolt “3”
TIP
•
Install the holder so that the arrow mark “a” fac-
es upward.
•
First tighten the bolt on the upper side of the
brake master cylinder holder, and then tighten
the bolt on the lower side.
1
2
3
1
2
1
2
a
b
Throttle cable cap screw
0.5 N·m (0.05 kgf·m, 0.37 lb·ft)
Front brake master cylinder hold-
er bolt
9 N·m (0.9 kgf·m, 6.6 lb·ft)
T
R
.
.
T
R
.
.