Yamaha YZ 2017 Series, Owner'S Service Manual, Page: 267 / 410

GENERATOR AND STARTER CLUTCH
5-66
2. Install:
• Washer
• Generator rotor nut “1”
3. Install:
• Starter idle gear shaft “1”
• Bearing “2”
• Starter idle gear 2 “3”
TIP
Apply the engine oil on the starter idle gear
shaft, bearing and idle gear inner circumfer-
ence.
4. Install:
• Dowel pin
• Crankcase cover gasket
• Left crankcase cover “1”
• Lead holder “2”
• Crankcase cover bolt
• Neutral switch lead “3”
TIP
• Pass the AC magneto lead “4” under the left
crankcase cover “a” as shown.
• Tighten the bolts in stage, using a crisscross
pattern.
5. Install:
• Washer “1”
• Damper assembly “2”
• Washer “3”
TIP
Apply the engine oil to the shaft and washers.
Generator rotor nut
65 Nm (6.5 m·kgf, 47 ft·lbf)
2
C
11
1 a b
T
R
.
.
1
1
2
1
2
3
Crankcase cover bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
New
T
R
.
.
4
1
a
1
2
3
2
1
2
3