Yamaha YXZ10YESH Owner'S Manual Download Page 207

Page: 207 / 218

10-1

EBU32750

SPECIFICATIONS

Dimensions:

Overall length:

3121 mm (122.9 in)

Overall width:

1626 mm (64.0 in)

Overall height:

1834 mm (72.2 in)

Wheelbase:

2300 mm (90.6 in)

Ground clearance:

330 mm (13.0 in)

Minimum turning radius:

6000 mm (236 in)

Weight:

Curb weight:

686.0 kg (1512 lb) (YXZ10YEXH)
705.0 kg (1554 lb) (YXZ10YESH)

Noise and vibration level:

Noise level (77/311/EEC):

85.8 dB(A) at 4125 r/min (YXZ10YESH_EUR/FRA/GBR,
YXZ10YEXH)

Uncertainty of measurement:

3.0 dB(A) (YXZ10YESH_EUR/FRA/GBR, YXZ10YEXH)

A-weighted sound power level:

100.0 dB(A) at 4125 r/min (YXZ10YESH_EUR/FRA/GBR,
YXZ10YEXH)

Uncertainty of measurement:

3.0 dB(A) (YXZ10YESH_EUR/FRA/GBR, YXZ10YEXH)

Vibration on seat (EN1032, ISO5008):

Will not exceed 0.5 m/s² (YXZ10YESH_EUR/FRA/GBR,
YXZ10YEXH)

Uncertainty of measurement:

0.0 m/s² (YXZ10YESH_EUR/FRA/GBR, YXZ10YEXH)

Vibration on handle (EN1032, ISO5008):

Will not exceed 2.5 m/s² (YXZ10YESH_EUR/FRA/GBR,
YXZ10YEXH)

Uncertainty of measurement:

0.2 m/s² (YXZ10YESH_EUR/FRA/GBR, YXZ10YEXH)

Engine:

Engine type:

Liquid cooled 4-stroke, DOHC

Cylinder arrangement:

Inline 3-cylinder

Displacement:

998 cm³

Bore

stroke:

80.0

66.2 mm (3.15

2.61 in)

Compression ratio:

11.3 : 1

Starting system:

Electric starter

Lubrication system:

Dry sump

Engine oil:

Recommended brand:

YAMALUBE

UB577AE0.book Page 1 Wednesday, June 8, 2016 9:35 AM

Summary of Contents for YXZ10YESH



























































































































































































































Search results

Summary of Contents for YXZ10YESH

Reviews:

Related manuals for YXZ10YESH

Brands by name

Popular brands

Yamaha YXZ10YESH, Owner'S Manual

Search results

Summary of Contents for YXZ10YESH

Reviews:

Related manuals for YXZ10YESH

Brands by name

Popular brands