8-19
8
12. Add 2.00 L (2.11 US qt, 1.76 Imp.qt) of
the recommended engine oil to the oil
tank, and then install and tighten the en-
gine oil tank filler cap and the cylinder
head cap.
13. Start the engine, warm it up for several
minutes, and then turn it off.
14. Remove the engine oil tank filler cap, and
then add sufficient oil of the recommend-
ed type to raise it to the maximum level
mark on the dipstick.
TIP
Be sure to wipe off spilled oil on any parts af-
ter the engine and exhaust system have
cooled down.
NOTICE
ECB03020
Do not use oils with a diesel specifica-
tion of “CD” or oils of a higher quality
than specified. In addition, do not use
oils labeled “ENERGY CONSERVING II”
or higher.
Make sure that no foreign material en-
ters the oil tank.
Tightening torques:
Engine oil drain bolt:
10 N·m (1.0 kgf·m, 7.2 lb·ft)
Engine oil tank drain bolt:
16 N·m (1.6 kgf·m, 12 lb·ft)
Recommended engine oil:
See page 10-1.
Oil quantity:
Oil change only:
2.50 L (2.64 US qt, 2.20 Imp.qt)
Oil change and filter replacement:
2.70 L (2.85 US qt, 2.38 Imp.qt)
UB577AE0.book Page 19 Wednesday, June 8, 2016 9:35 AM
