background image

9-69

1

2

3

4

5

6

7

8

9

EAU26343

CONSUMER INFORMATION

Identification numbers<IXE>

Key identification number<IXE>

Vehicle identification number<IXE>

EAU26343

CONSUMER INFORMATION

9-1

EAU26410

Vehicle identification number

ZAUM00**

1

1. Vehicle identification number

The vehicle identification number is
stamped into the frame.

TIP

The vehicle identification number is used
to identify your motorcycle and may be
used to register your motorcycle with
the licensing authority in your area.

EAU26381

Key identification number

ZAUM00**

1

1. Key identification number

The key identification number is
stamped into the key tag.
Record this number in the space pro-
vided and use it for reference when or-
dering a new key.

EAU26352

Identification numbers

Record the key identification number,
vehicle identification number and model
label information in the spaces provided
below for assistance when ordering
spare parts from a Yamaha dealer or for
reference in case the vehicle is stolen.

KEY IDENTIFICATION NUMBER:

VEHICLE IDENTIFICATION NUMBER:

MODEL LABEL INFORMATION:

Summary of Contents for YW50Z





















































































Reviews: