Yamaha YW50Z, Owner'S Manual

Page: 20 / 84

3-20
1
2
3
4
5
6
7
8
9
EAU1044D
INSTRUMENT AND CONTROL FUNCTIONS
Indicator and warning lights<IXE>
Two-stroke engine oil level warning light<IXE>
EAU11020
Turn signal indicator light “
4 4 4 4 4 6 6 6 6 6
”
This indicator light flashes when the turn
signal switch is pushed to the left or right.
EAU11080
High beam indicator light “
& & & & &
”
This indicator light comes on when the
high beam of the headlight is switched
on.
To unlock the steering
1
2
ZAUM00**
1. Turn.
2. Release.
Push the key in, and then turn it to “OFF”
while still pushing it.
3-2
EAU11004
Indicator and warning lights
ZAUM00**
1
0
10
20
30
40
0000001
MPH
10
20
30
40
50
60
km/h
0
2 3
1. Turn signal indicator light "
5
"
2. High beam indicator light "
&
"
3. 2-stroke engine oil level warning light
"
7
"
EAU32442
2-stroke engine oil level warning
light “
7 7 7 7 7
”
The warning light comes on if the key is
in the “*” position or when the engine oil
level in the 2-stroke engine oil tank is
low during operation. If the warning light
comes on during operation, stop imme-
diately and fill the oil tank with
YAMALUBE 2 or an equivalent 2-stroke
engine oil. The warning light should go
off after the 2-stroke engine oil tank has
been refilled.
TIP
If the 2-stroke engine oil level warning
light does not come on when the key is
in the “*” position or does not go off after
the 2-stroke engine oil tank has been
refilled, have a Yamaha dealer check the
electrical circuit.
ECA12720
NOTICE
Do not operate the vehicle until you
know that the 2-stroke engine oil level
is sufficient.