Yamaha YVC-1000MS, User Manual

Page: 45 / 47

YVC-1000MS User's Manual
45
When the product detects a problem related to acoustic conditions, you can confirm its details using the voice
guidance.
(For details, refer to "When automatic audio tuning has ended abnormally (problem detection)" (page 29)".
Take the appropriate actions - outlined below - to resolve the detected problem.
Warning guidance list
Voice guidance: Cause Action
Please connect the
microphones. Automatic audio
tuning cannot start.
•
A microphone cable has been
unplugged.
•
A microphone cable is not connected
correctly.
Correctly connect the microphone cable to
the microphone or the Control Unit.
(
→
page 11)
The volume is set too low.
Automatic audio tuning cannot
start. The speaker volume is set low. Turn up the speaker volume level so that
four or more lamps light up on the level
indicator. (
→
page 32)
The external speakers are not
working. Please refer to the
User's manual and check the
external speaker settings. • An audio cable has been unplugged.
•
An audio cable is not connected
securely.
Securely connect audio cables to external
speakers or the Control Unit.
(
→
page 27)
The volume of an external speaker is low. Turn up the volume of the external
speaker. (
→ page 32)
The distance between the
speakers and the microphones
is too close. The maximum
volume is now limited. The Control Unit or external speakers are
too close to the microphones. Place all the microphones at least 1 m
(3.3 ft) away from the Control Unit or
external speakers. (
→
page 25, 27)
The microphones are too far
from the speakers. Please refer
to the User's manual. The Control Unit is placed too far from
the microphones. Place all the microphones within 20 m
(66 ft) away from the Control Unit.
(
→
page 25)
A latency problem has been
detected on the external
speakers. Please refer to the
User's manual and use suitable
external speakers. A high latency has been detected on the
external speakers. Place all the external speakers within 20 m
(66 ft) away from all the microphones.
(
→
page 27)
If the problem recurs, replace with
external speakers with a low latency.
A sound distortion problem
has been detected on the
external speakers. Please refer
to the User's manual and check
the external speaker settings. The external speaker is set to the high
volume. Turn down the volume of the external
speaker. (
→
page 32)
The external speakers have high
distortion. Replace with an external speaker that has
low distortion.