YVC-1000MS User's Manual
22
■
Pairing and Bluetooth connection using the NFC function
(for NFC-compatible model)
If the smartphone satisfies the following conditions (hereinafter, referred to as an "NFC-compatible model"), pairing
and Bluetooth connection operations can be performed easily.
•
NFC-compatible Android devices
Before starting this procedure, turn the NFC function on in the smartphone.
This function may not work or the connectable distance may be different depending on smartphones.
•
If the smartphone is covered with a case, remove the case.
•
If pairing or Bluetooth connection has failed, change the position of where to pass the smartphone over the product.
1
Press the power button (
) to turn
the product on.
When the power is turned on, all the buttons light up
green.
2
Press the Bluetooth button (
).
The Bluetooth button (
) flashes blue, and the
Bluetooth connection is enabled.
3
Pass the smartphone over the NFC
logo of the product.
When the connection is completed, the button lights
up blue.
Also, the voice guidance notifies the user that a
Bluetooth connection has succeeded.
If the Bluetooth button (
) is pressed while the Bluetooth
button (
) is flashing blue or if 90 seconds has elapsed
while a Bluetooth connection remains uncompleted, the
Bluetooth enable status is canceled.
■
Terminating a Bluetooth connection
If one of the following operations is performed while a Bluetooth connection is made, a Bluetooth connection is
terminated.
•
Press the Bluetooth button (
).
•
Perform the Bluetooth disconnection procedure on the smartphone.
•
Pass the smartphone over the NFC logo of the product (for an NFC-compatible model).
When a Bluetooth connection is terminated, the Bluetooth button (
) lights up green.
Also, the voice guidance notifies the user that a Bluetooth connection has been terminated.
When the product is placed into the standby mode, a Bluetooth connection is also terminated.
Note
NFC logo
