YVC-1000MS User's Manual
34
When not using a Bluetooth connection, you can disable the Bluetooth function. To use a Bluetooth connection again,
enable the Bluetooth function.
■
Disabling the Bluetooth function
1
When the power is on (the power
button (
) lights up green), press
and hold the power button (
) for 2
seconds or more to enter standby
mode.
The product enters the standby mode, and the power
button (
) lights up red.
2
Press the power button (
) while
holding down the Bluetooth button
(
) and the volume - button (
) at
the same time, then release the
power button (
) only.
The lamps on the level indicator will light up
moving horizontally, and the power-on operation
starts. Be sure to hold down the Bluetooth button
(
) and the volume - button (
).
3
When the Bluetooth function is
disabled, you will be notified by voice
guidance. When the level indicator is
turned off, release the Bluetooth
button (
) and the volume - button
(
).
Check whether the Bluetooth button (
) is not lit.
■
Enabling the Bluetooth function
1
When the power is on (the power
button (
) lights up green), press
and hold the power button (
) for 2
seconds or more to enter standby
mode.
The product enters the standby mode, and the power
button (
) lights up red.
2
Press the power button (
) while
holding down the Bluetooth button
(
), then release the power button
(
) only.
The lamps on the level indicator will light up
moving horizontally, and the power-on operation
starts. Be sure to hold down the Bluetooth button
(
).
3
When the Bluetooth function is
enabled, you will be notified by voice
guidance. When the level indicator is
turned off, release the Bluetooth
button (
).
Check whether the Bluetooth button (
) is lit.
Enabling or disabling the Bluetooth function