Yamaha YFM90 2019 Owner'S Manual Download

Page: 112 / 126

8-35

3. Remove the blown fuse, and then install a

new fuse of the specified amperage.

WARNING! Always use a fuse of the spec-
ified rating, and never use a substitute ob-
ject in place of the proper fuse. An
improper fuse or a substitute object can
cause damage to the electrical system,
which could lead to a fire.

[EWB02173]

4. Turn on the main switch and start the engine.
5. Install the seat.
6. If the fuse immediately blows again, have a

Yamaha dealer check the vehicle.

EBU34030

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel bolts.

3. Elevate the ATV and place a suitable stand

under the frame.

4. Remove the bolts from the wheel.
5. Remove the wheel.

EBU34042

Installing a wheel

1. Install the wheel with the arrow mark pointing

in the forward rotating direction of the wheel,
and then install the wheel bolts.

Specified fuse:

7.5 A

1. Wheel bolt

UBD364E0.book Page 35 Monday, January 28, 2019 9:30 AM

Summary of Contents for YFM90 2019































































































































Search results

Summary of Contents for YFM90 2019

Reviews:

Related manuals for YFM90 2019

Brands by name

Popular brands

Yamaha YFM90 2019, Owner'S Manual

Search results

Summary of Contents for YFM90 2019

Reviews:

Related manuals for YFM90 2019

Brands by name

Popular brands